Dell PowerEdge R7625 - Page 128

Figure 95. C7-2: 24 x 2.5-inch SAS4/SATA (w/ FPERC12)
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 93. 24 x 2.5-inch SAS4/SATA (w/ FPERC12)
Order From To
1 SL1_CPU2_PA4 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
2 SL2_CPU2_PB4 (signal connector on system board) CTRL_DST_PB1 (fPERC input connector)
3 SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
4 CTRL_SRC_SB1 (fPERC controller connector) BP_DST_SB1 (backplane expander signal connector)
5 CTRL_SRC_SA1 (fPERC controller connector) BP_DST_SA1 (backplane expander signal connector)
6 SIG_PWR_2 (system board power connector) BP_PWR_2 (backplane power connector)
128 Installing and removing system components