Dell PowerEdge R7625 - Page 130

Figure 97. C7-4: 24 x 2.5-inch SAS4/SATA w/ 6 x Uni (w/ FPERC12)
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 95. 24 x 2.5-inch SAS4/SATA w/ 6 x Uni (w/ FPERC12)
Order From To
1 SL1_CPU2_PA4 (signal connector on system
board)
DST_PA2 (backplane signal connector)
2 SL2_CPU2_PB4 (signal connector on system
board)
DST_PB1 (backplane signal connector)
3 SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
4 CTRL_SRC_SA1 (fPERC controller connector) BP_DST_SA1 (backplane signal connector)
5 CTRL_SRC_SB1 (fPERC controller connector) BP_DST_SB1 (backplane signal connector)
6 SL3_CPU1_PA1 (signal connector on system
board)
CTRL_DST_PA1 (fPERC input connector)
7 SL4_CPU1_PB1 (signal connector on system
board)
CTRL_DST_PB1 (fPERC input connector)
8 SIG_PWR_2 (system board power connector) BP_PWR_2 (backplane power connector)
9 SL5_CPU1_PB2 (signal connector on system
board)
DST_PB2 (backplane signal connector)
130 Installing and removing system components