Figure 137. Riser 4P FL
1. Slot 7
Figure 138. Riser 4P HL
1. Slot 7
NOTE: The expansion-card slots are not hot-swappable.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion
cards with the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be
installed in the card priority and slot priority order.
Table 106. Expansion card riser configurations
Expansion card riser PCIe slots Processor
connection
Height Length Slot
width
Riser 1B
Slot 1
Processor 1 Full Height Half Length x8
Slot 2
Riser 1P Slot 2 Processor 1 Full Height
Half Length / Full
Length
x16
Riser 1Q
Slot 1
Processor 1 Full Height Half Length x8
Slot 2
162 Installing and removing system components
To Next Page
Loading...
