Dell PowerEdge R7625 - Page 164

Table 107. PCIe Riser Configs (continued)
Confi
g #
RSR
Configuration
# of
CPU
s
PERC type
supported
Rear
Storage
Possible
x8 CPU 1 x16 CPU 1 x8 CPU 2 x16 CPU 2
12 R1-E3X4
Paddle
card+R2A+R3B
+R4-E3 Paddle
card
2 No Yes 0 2 2 2
13 R1-E3 Paddle
card+R2A+R3B
+R4-SCMX4
Paddle card
2 No Yes 0 2 2 2
NOTE: The expansion-card slots are not hot-swappable.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion
cards with the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be
installed in the card priority and slot priority order.
Table 108. Config0. No RSR
CARD TYPE SLOT PRIORITY MAXIMUM NUMBER OF CARDS
Inventec (LOM Card) Integrated slot 1
Intel (OCP: 25Gb) Integrated slot 1
Mellanox (OCP: 25Gb) Integrated slot 1
Broadcom (OCP: 25Gb) Integrated slot 1
Broadcom (OCP: 25Gb) Integrated slot 1
Broadcom (OCP: 25Gb) Integrated slot 1
Broadcom (OCP: 10Gb) Integrated slot 1
Intel (OCP: 10Gb) Integrated slot 1
Broadcom (OCP: 10Gb) Integrated slot 1
Broadcom (OCP: 1Gb) Integrated slot 1
Intel (OCP: 1Gb) Integrated slot 1
Broadcom (OCP: 1Gb) Integrated slot 1
FOXCONN (BOSS) Integrated slot 1
FOXCONN (BOSS) Integrated slot 1
Table 109. Config1. R1B+R4B
CARD TYPE SLOT PRIORITY MAXIMUM NUMBER OF CARDS
Inventec (Serial, FH) 8 1
NVIDIA (GPU A2, FH) 1,2,7,8 4
FOXCONN (FPERC H355) Integrated slot 1
FOXCONN (FPERC HBA355I) Integrated slot 1
External Adapter HBA465E, LP/FH 1,2,7,8 4
External Adapter H965e, LP/FH 1,2,7,8 4
Inventec (LOM Card) Integrated slot 1
Intel (NIC: 100Gb, FH) 1,2,7,8 4
164 Installing and removing system components