Disassembly and reassembly
Recommended tools
The procedures in this document require the following tools:
• Phillips #0 screwdriver
• Phillips #1 screwdriver
• Plastic scribe-Recommended for field technician
Screw List
The following table shows the screw list and the images for different components.
Table 1. Screw list
Component Screw type Quantity Image
M.2 2230/2280 Solid-state drive M2x3 1
WLAN card M2x3 1
SD card reader M6x32 2
Support bracket M6x32 2
Power supply unit M6x32 2
System board M2x4
6-32
1
5
Side cover
Removing the side cover
Prerequisites
1. Follow the procedure in before working inside your computer.
NOTE: Ensure that you remove the security cable from the security-cable slot (if applicable).
2
10 Disassembly and reassembly
To Next Page
Loading...
