Option Description
• Trusted Execution
This option is not set by default.
Maintenance
Table 15. Maintenance
Option Description
Service Tag
Displays the service tag of your computer.
Asset Tag
Allows you to create a system asset tag if an asset tag is not already set.
This option is not set by default.
SERR Messages
Controls the SERR message mechanism. Some graphics cards require that the SERR message
mechanism be disabled.
This option is not set by default.
BIOS Downgrade
Allows you to flash previous revisions of the system firmware.
• Allow BIOS Downgrade
This option is set by default.
Data Wipe
Allows you to securely erase data from all internal storage devices.
• Wipe on Next Boot
This option is not set by default.
Bios Recovery
BIOS Recovery from Hard Drive—This option is set by default. Allows you to recover the corrupted
BIOS from a recovery file on the HDD or an external USB key.
BIOS Auto-Recovery— Allows you to recover the BIOS automatically.
NOTE: BIOS Recovery from Hard Drive field should be enabled.
Always Perform Integrity Check—Performs integrity check on every boot.
System logs
Table 16. System Logs
Option Description
BIOS events
Displays the system event log and allows you to clear the log.
• Clear Log
This option is not set by default.
Advanced configurations
Table 17. Advanced configurations
Option Description
Pcie LinkSpeed
Allows you to choose the Pcie linkspeed.
Click one of the following options:
100 System Setup
To Next Page
Loading...
