Post behaviour
Table 12. POST Behavior
Option Description
Numlock LED
Species if the NumLock function can be enabled when the system boots. This option is set by default.
Keyboard Errors
Species whether keyboard related errors are reported when it boots. This option is set by default.
Extend BIOS POST Time
Allows you to create additional pre-boot delay and see POST status messages.
Click one of the following options:
• 0 seconds(Default)
• 5 seconds
• 10 seconds
Security Audit Display
Disable
Allows you to disable the display of the Security Audit results during POST.
• Disable Display Of Security Audit Display
This option is not set by default.
Full Screen Logo
Allows you to display full screen logo, if your image matches screen resolution.
• Enable Full Screen Logo
This option is not set by default.
Warnings and Errors
Allows you to select dierent options to either stop, prompt and wait for user input, continue when
warnings are detected but pause on errors, or continue when either warnings or errors are detected
during the POST process.
Click one of the following options:
• Prompt on Warnings and Errors—Default
• Continue on Warnings
• Continue on Warnings and Errors
Manageability
Table 13. Manageability
Option Description
USB Provision
Allows you to provision Intel AMT using the local provisioning le via
a USB storage device.
• Enable USB Provision
NOTE: When disabled, provisioning Intel AMT from a USB
storage device is blocked.
This option is not set by default.
MEBx Hotkey
Allows you to specify if the MEBx Hotkey function should be
enabled when the system boots
82 System Setup
To Next Page
Loading...
Need help?
General