ExpressCard Reader
Removing the expresscard
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a) battery cover
b) battery
c) base cover
d) hard drive
e) keyboard
f) palmrest
3. To remove expresscard:
a) Disconnect the expresscard cable from the computer [1].
b) Remove the M2.5x5.0 screws that secure expresscard to the computer [2].
c) Remove the expresscard board from the computer [3].
Installing the expresscard
1. Place the expresscard on the computer.
2. Replace the M2.5x5.0 screws that secure expresscard on the computer.
3. Connect the expresscard cable.
4. Install the:
a) palmrest
b) keyboard
c) hard drive
d) base cover
e) battery
f) battery cover
30
Disassembly and reassembly
To Next Page
Loading...
