Dell Precision 7720 - Camera

Installing the eDP cable
1. Route the eDP cable on the display cover.
2. Affix the eDP cable on the display cover.
3. Install the:
a) display panel
b) display bezel
c) display assembly
d) palmrest
e) keyboard
f) hard drive
g) base cover
h) battery
i) battery cover
4. Follow the procedure in After working inside your computer.
Camera
Removing the camera
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a) battery cover
b) battery
c) base cover
d) hard drive
e) keyboard
f) palmrest
g) display assembly
h) display bezel
3. To remove camera:
a) Peel the eDP cable and disconnect the camera cable from the computer [1].
b) Lift the camera module from the computer [2].
52
Disassembly and reassembly