EasyManua.ls Logo

Dell Precision 7720 - Page 72

Dell Precision 7720
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Option Description
Disabled
Every Day
Weekdays
Select Days
Default setting: Disabled
Deep Sleep
Control
Disabled (selected by default)
Enabled in S5 only
Enabled in S4 and S5
USB Wake
Support
Allows you to enable USB devices to wake the system from Standby.
NOTE: This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
Enable USB Wake Support
Wake on Dell USB-C dock
Wireless Radio
Control
Allows you to enable or disable the feature that automatically switches from wired or wireless networks without
depending on the physical connection.
Control WLAN Radio
Control WWAN Radio
Wake on LAN/
WLAN
Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
LAN signal.
Disabled
LAN Only
WLAN Only
LAN or WLAN
Default setting: Disabled
Peak Shift This option enables you to minimize the AC power consumption during the peak power times of day. After you
enable this option, your system runs only in battery even if the AC is attached.
Enable peak shift (disabled)
Set battery threshold
Advanced Battery
Charge
Configuration
This option enables you to maximize the battery health. By enabling this option, your system uses the standard
charging algorithm and other techniques, during the non-work hours to improve the battery health.
Primary Battery
Charge
Configuration
Allows you to select the charging mode for the battery. The options are:
Adaptive (default)
Standard — Fully charges your battery at a standard rate.
ExpressCharge — The battery charges over a shorter period of time using Dell’s fast charging technology.
This option is enabled by default.
Primarily AC use
Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable
the Advanced Battery Charge Configuration option.
Type-C connector
power
7.5 Watts(selected by default)
15 Watts
72 System setup

Table of Contents

Related product manuals