Quick Start! Moisture Meter User Manual 4.0
Quick Start!
1. Unpack - see page 6.
2. Connect the battery or press Esc to wake the Moisture Meter if it is asleep.
3. Connect the sensor. The HH2 will assume it is an ML2 ThetaProbe in
mineral soil unless you tell it otherwise. Ignore that for now!
4. Put the sensor in soil and press Read to read and display a result.
5. Press Store to save it.
6. Repeat 4 & 5.
To explore menu options see page 9
To retrieve readings to your PC (This will take a little longer):
• Install and Run HH2Read (see page 60)
• Press Retrieve, enter a file name and press OK
About this Manual
Introduction, Unpacking, Parts page 5
Navigating Options and Readings page 9
Turn to the separate chapters for
SM200 & ThetaProbes page 17
Profile Probes page 27
WET Sensors page 39
Equitensiometers page 51
The rest of the manual has sections on
Memory management page 58
HH2Read page 60
Dataset Import Wizard page 68
Data File Layout page 70
About soil parameters a0 & a1 page 74
Linearisation Tables page 76
Changing the Battery page 78
Maintenance page 81
There is a Technical Reference with
Specifications page 82
Troubleshooting page 86
Accessories page 98
Water Deficit Explained page 103
Field Water Capacity page 106
Glossary & Index page 112
To Next Page
Loading...