Equitensiometers Moisture Meter User Manual 4.0
Reading the Equitensiometer
Before taking readings
1. Select Options, Device, EQ2
2. Connect it to the HH2.
See also: Accessories on page 98
3. Set the Plot, Sample and Device ID’s and Sensor Depth if you wish.
See also: Equitensiometer Options Summary on page 55.
To take Readings
1. Press Read on the HH2 keypad.
If successful the meter displays the reading, e.g.
Reading ready for saving or deleting
2. Press Store to save the readings, or press Esc.
3. Press Read for the next reading
Press Esc if you do not want to save the reading. It will still show on the display but
has not been saved.
Can't Store Readings?
The Store option becomes unavailable when memory is full (or corrupted). In this
case upload the readings to your PC using HH2Read, then, using Options, Data,
Erase (via the keypad), delete the readings in the HH2.
See also: Available memory on page 63.
To Next Page
Loading...