13
Note that the date - month - year order will be set to reflect that on your PC the first
time you use the Settings, Clock option in the Data Collection software HH2Read on
your PC.
Use the up and down keys to change the first field and press Set to accept it.
The
indicator jumps to the next field.
Repeat for the second and third fields in the Date display.
This will return you to the Date and Time menu.
Scroll down to the Set Time option with the key and repeat the above instructions
to set the hours, minutes and seconds fields, shown below:
Options are device specific
Options are only displayed if relevant to the device selected.
For instance, if under device you select Equitensiometer, then you will not be given a
choice of Soil Type or Soil Set-Up, or Units.
The default settings in the Moisture Meter are for an ML2 ThetaProbe.
The next section is organised by sensing device. Each has its own menu navigation
tree and a table indicating the default settings, available menu options and permitted
ranges for settings.
Upload Data to PC
From the main Options menu select Remote and press Set.
The rest of the work is done from your PC keyboard.
If not yet installed, install HH2Read on your PC, as described on page 60.
Connect the PC to your Moisture Meter as explained on page 61.
Run HH2Read and select its Retrieve command as described on page 65.
The end result is that your data is saved to file in a comma separated (.CSV) format
as shown on page 70.
See also Dataset Import Wizard on page 68.
Note: you can’t store or upload averages to the PC
To Next Page
Loading...