Delta-T HH2 - Device; Options

SM200 and ThetaProbes

19
Quick Start
On first configuring the HH2 for use with a ThetaProbe:
Select Options, Device, SM200, ML2 or ML1.
Select a soil type or the generic mineral soil calibration will be used.
Connect the device and press Read and Store to take and save a reading.
See also: SM200 and ThetaProbe Options Summary on page 24
Display Units Options on page 22
Reading the ThetaProbe on page 25.
Options
Device
Selects the device to be used for the next reading
Press Set at the start-up or readings screen to display the Options menu.
Scroll down to Device using the up  and down  keys and press Set.
Options:

Device
Scroll down to SM200, ML1 or ML2 using the up and down keys and press Set to
select one.
Device:

ML2
Press Esc to return to the start-up screen and press Read.
Your chosen device should now appear, and re-appear when the Moisture Meter
re-awakes after sleeping.
(Use ML2 for ThetaProbe type ML2x also).