Delta-T HH2 - WET Options Summary

WET Sensor

47
WET Options Summary
Menu
Actions, Notes, (factory default values in bold)
Data
Plot Id
Sets Plot Label, A..Z
Sample
Sets Sample Number,
1
..2000
Device Id
Sets Device ID,
0
..255
Root Depth
Sets Rooting Depth, 0..9950mm
Sensor Depth
Sets Sensor Depth, 0..9999mm
Erase
No (cancels the action), Yes (erases all stored readings)
Device
Selects the device for subsequent readings.
Options : SM200, ML1, ML2, EQ1, EQ2, PR2, PR1, PR-
Special; also WET if WET calibration is installed
Soil Type
Selects the soil type for WET sensor readings.
Options: Organic, Mineral, Clay, Sand, Custom 1..5;
also Stonewool v & Stonewool h (WET-ST1 option)
also Coir, Peat-based, Min g/h soil & Pot soil (WET-GS1)
Soil Set-Up Sets the properties of the various WET soil types.
Custom 1..n,
Organic, Mineral,
Custom 1..n
b0
(Custom 1..n only) Sets b0 for Custom 1..n,
1.0
..2.0
b1
(Custom 1..n only) Sets b1 for Custom 1..n, 7.0..8.5
Parameter
Sets Soil Parameter, 1.0..4.1..9.0
Capacity
Sets Field Capacity, 0..0.38..1 m
3
.m
-3
Units
Selects the units for displaying and storing WET readings.
Conductivity
Selects the Conductivity units.
Options : mS.m
-1
, mS.cm
-1
, µS.cm
-1
Water Content
Selects the Wetness units.
Options : m
3
.m
-3
, %vol
Display
Selects the values to be displayed and stored for WET
readings.
Options : WET, WET EC
b
ε
b
, WET mmDef
Compensation
Temperature
Sets the temperature to which conductivity readings are
adjusted. Options : None, 20°C, 25°C
Percent
Sets the % temperature compensation, -1.0..2.0..4.0%
Date and Time Displays and sets the date and time
Set Date Date screen
Set Time
Time screen
Status
Displays status information
Resources
Resources screen
Versions
Versions screen
Remote
Connecting to PC screen