Addendum to HH2 User Manual Version 4.0 for SM150
Addendum to HH2 User Manual
Version 4.0 for SM150
Please keep this document with your HH2 User Manual.
SM150 Sensor readings
Support for SM150 requires HH2 Firmware version 2.6 and HH2Read version 2.6 or
later.
To select the SM150 for the next reading:
Press Set at the start-up or readings screen to display the Options menu.
Scroll down to Device using the up ▲and down ▼ keys and press Set.
Scroll down to SM150 using the up and down keys and press Set.
Press Read to take a reading.
How to upgrade your HH2
Support for SM150 is provided in version 2.6 of the HH2 firmware and version 2.6 of
the PC software HH2Read.
Older versions of the HH2 Moisture Meter can be upgraded to work with the SM150 –
see HH2 upgrades section in our price list for details. This requires the HH2 to be
sent back to Delta-T or our distributor.
To Next Page
Loading...