Navigating Options and Readings Moisture Meter User Manual 4.0
Example: Change the Plot Label
The Plot Label is an optional label in the Data sub menu and can take any value from
A to Z.
Press Esc to wake the meter.
Press Set to display the main Options menu.
Scroll down to Data and Press Set.
Scroll down to Plot ID and Press Set.
In this example, "C" is offered because it was saved with the previous reading.
Press up or down to change the value.
Press Set to select the new value.
To reject an option or value press the Esc.
In practice you will most probably visit the Data sub menu each time you change your
location - to change one or more labels - in order to better identify each reading later.
Setting the Clock
You can set the clock from the PC or from the keypad of the Moisture Meter.
To set the time in the HH2 to that of your PC use the Settings, Clock command in
the HH2Read application, (see page 64). Alternatively you can set the clock from the
keypad.
Note: The date - month - year order will be set to reflect that on your PC the first time
you use the Settings, Clock option in the HH2Read.
To set the clock from the keypad
Press Set at the start-up screen to display the Options menu.
Scroll down to Date and Time using the up and down keys and press Set.
To Next Page
Loading...