Delta-T HH2 - SM200 and Thetaprobe Options Summary

24

SM200 and ThetaProbes Moisture Meter User Manual 4.0
SM200 and ThetaProbe Options Summary
Menu
Actions, Notes, (factory default values in bold)
Data
Plot Id
Sets Plot Label, A..Z
Sample
Sets Sample Number, 1..2000
Device Id
Sets Device ID, 0..255
Root Depth
Rooting Depth, 0..9950mm
Sensor Depth
Sets Sensor Depth, 0..9999mm
Erase
No (cancels the action), Yes (erases all readings stored
in memory)
Device
Selects the device for subsequent readings. Options
are:
SM200, ML1, ML2, EQ1, EQ2, PR1, PR1-Special; also
EC2 or WET if EC2 or WET calibration is installed
Soil Type
Menu: selects the soil type for ML1 and ML2 readings.
Options are:
Organic, Mineral, Soil 1..5
Soil Set-Up
Sets the properties of the various soil types.
Organic
Sets Field Capacity for Organic soil, 0...38..100 %vol
Mineral
Sets Field Capacity for Mineral soil, 0...38..100 %vol
Soil 1..5
a0
Sets a0 for Soil 1..n, -49.4.. 1.0..50.0
a1
Sets a1 for Soil 1..n, 0.1..7.0..50.0
Capacity
Sets Field Capacity for Soil 1..n, 0...0.38..1 m
3
.m
-3
Display
Selects the values and units to be displayed and stored
for SM200, ML1 and ML2 readings.
Options are:
m
3
.m
-3
, %vol, mmDef, mV, mmDef + m
3
.m
-3
, mm def +
%vol, m
3
.m
-3
+ mV, %vol + mV, mm def + mV
Date and Time
Displays and sets the date and time
Set Date
Date screen
Set Time
Time screen
Status
Displays status information
Resources
Resources screen
Versions
Versions screen
Remote
Connecting to PC screen