Delta-T HH2 - Page 61

54

Equitensiometers Moisture Meter User Manual 4.0
Data Menu
Select Options, Data to see this menu.
Plot ID
You can label each reading with a Plot ID.
Options: - A to Z. Default: A.
Select Options, Data, Plot ID.
Scroll through the options, and press Set to select one.
Press Esc to return to the main menu.
Sample
A sample number is automatically assigned to each reading.
It automatically increments by one each time you store a reading.
Options: 1 to 2000. Default: 1.
Select Options, Data, Sample.
Select a number and press Set.
Press Esc to return to the main menu.
Device ID
You may label readings with a Device ID.
Options: 0 to 255. Default: 0
Select Options, Data, Device ID.
Select a number and press Set.
Press Esc to return to the main menu.
Sensor Depth
Readings can be labelled with the soil depth.
Options: 0 .. 9950 mm. Default : O
Select Options, Data Sensor Depth.
Select a number and press Set.
Press Esc to return to the main menu.
Date and Time
See Setting the Clock on page 12.