VFD-MS300/MH300 EtherNet/IP Communication Card CMM-EIP01
CMM-EIP01 Operation Manual
52
7.7 Keypad Operation (3)
Function Description If the password is lost, use the keypad to revert to default factory settings
Network
environment
(1) Set up a password in CMM-EIP01
(2) If the password cannot be recovered, revert to default factory settings by using
the keypad.
1. Refer to Section 7.8 on how to set up the password for CMM-EIP01.
2. Launch the setup dialog box again. At this time, the password status is "locked" and
no settings can be modified. In addition, there is no way to revert to factory default
settings.
To Next Page
Loading...
