Denon AVR-X500 Owner's Manual

15
Appendix
TipsSettingsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
W1 DIMMER button
Each press of this switches the brightness of the display (vpage36).
W2 AUDIO button
Adjusting the sound field eects (vpage62).
W3 VOLUME buttons (df)
These adjust the volume level (vpage36).
W4 SETUP button
This displays the menu on the TV screen (vpage53).
W5 TONE button
Adjusts the tonal quality of the sound (vpage66).
W6 MUTE button (:)
This mutes the output audio (vpage36).
W7 AUDIO DELAY buttons (+, –)
Compensates for incorrect timing between video and audio
(vpage69).
W1
W3
W7
W6
W5
W2
W4

Denon AVR-X500 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Pre-out channels	1 SW
Speaker selector	No
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	140 W
Power output per channel (20-20KHz@8 Ohm)	75 W
HDMI in	4
Audio (L/R) in	3
Composite video in	2
Ethernet LAN (RJ-45) ports	0
Number of HDMI outputs	1
Connectivity technology	Wired
Speakers connectivity type	Clamp terminals
Multichannel pre out connectivity	RCA
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
Apple docking compatibility	Not supported
Number of products included	1 pc(s)
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	330 W
Cables included	AC

Weight and Dimensions

Depth	319 mm
Width	434 mm
Height	151 mm
Weight	7900 g