Denon AVR-X500

55
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Auto Preset
A maximum of 56 radio stations can be automatically preset.
2 Start
The unit starts to tune in to radio stations automatically and preset
them.
•When presetting is completed, “Completed” is displayed for about
5 seconds.
%
•The preset memory is overwritten.
•When radio stations cannot be preset automatically, manually select and preset
desired broadcast stations (vpage 41 “Presetting the current broadcast
station (Preset Memory)”).
Preset Skip
When tuning preset broadcast stations, you can set blocks (A – G) or
individual broadcast stations that you don’t want to display in advance.
2 Block A – Block G
Select a block to be skipped from among preset blocks (from A to G).
On (Default) : Display the selected preset memory block.
SKIP : Do not display the selected preset memory block.
Source Level
This function corrects the playback level of the selected input source’s
audio input.
Make this setting if there are dierences in the input volume levels
between the dierent sources.
2 Source Level
–12dB – +12dB (Default : 0dB)