Denon AVR-X500

67
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Setting the Night mode
Compress dynamic range (dierence between loud and soft sounds).
NIGHT
1
Press NIGHT.
The “NIGHT MODE” screen is displayed on the TV screen.
Low : Set the adjusted value to “Low”.
Mid : Set the adjusted value to “Middle”.
High : Set the adjusted value to “High”.
Auto : Automatic dynamic range compression on/o control
according to the source.
O : Not set.
%
•You can set “Auto” only for the Dolby TrueHD source.
•The default setting is “O”. When the input signal is Dolby TrueHD source, the
default setting is “Auto”.