Denon AVR-X500 Owner's Manual

7
Appendix
TipsSettingsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
High quality sound
•With discrete circuit technology, the power amplifier provides
identical quality for all 5-channels (110 Watts x 5-channels)
For optimum realism and stunning dynamic range, the power amplifier
section features discrete power devices (not integrated circuitry).
By using high current, high power discrete power devices, the amplifier
is able to easily drive high quality speakers.
•High definition audio support
The unit is equipped with a decoder which supports high-quality digital
audio format for Blu-ray Disc players such as Dolby TrueHD, DTS-HD
Master Audio, etc.
High performance
•HDMI connections enable quick connection to various digital AV
devices (4 inputs, 1 output)
The unit is equipped with 4 HDMI input connectors for connecting
devices with HDMI connectors, such as a Blu-ray Disc player, game
console, HD digital camcorder, HDTVs, etc.
•Supports HDMI (3D, Deep Color and “x.v.Color”) (vpage81)
Advanced HDMI features are supported, including 3D passthrough,
Deep Color and “x.v.Color”.
•Features an PORTABLE input jack on the front panel for connecting
portable audio player (vpage30)
Compressed Audio Restorer is Denon technology that restores
compressed music sources to their original pre-compressed quality to
give you a lively sonic ambience with greater detail and depth.
Easy operation
•GUI overlay on HD source
You can easily make settings for your home theatre system while
viewing menus on the TV screen. These menu displays can also be
output to the monitor over HDMI.
•Easy to use, screen display
Simple settings are enabled with the setting menus displayed on the
TV screen. When you control the sound volume, the volume level is
displayed on the screen, and when you switch the input source, the
name of the input source is displayed.
Features

Denon AVR-X500 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Pre-out channels	1 SW
Speaker selector	No
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	140 W
Power output per channel (20-20KHz@8 Ohm)	75 W
HDMI in	4
Audio (L/R) in	3
Composite video in	2
Ethernet LAN (RJ-45) ports	0
Number of HDMI outputs	1
Connectivity technology	Wired
Speakers connectivity type	Clamp terminals
Multichannel pre out connectivity	RCA
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
Apple docking compatibility	Not supported
Number of products included	1 pc(s)
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	330 W
Cables included	AC

Weight and Dimensions

Depth	319 mm
Width	434 mm
Height	151 mm
Weight	7900 g