EasyManua.ls Logo

Denon AVR-X500

Denon AVR-X500
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
65
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Dimension
Shift sound image center to front or rear to adjust playback balance.
0 – 6 (Default : 3)
%
•You can set this when the sound mode is Dolby PLg in the “Music” mode.
•As you set a smaller number, the surround sound field shifts backward; as you set
a larger number, the surround sound field shifts forward.
Center Width
Distributes the dialogue output from the center channel to left and right
channels and widens the sound image in the front.
0 – 7 (Default : 3)
%
•You can set this when the sound mode is Dolby PLg in the “Music” mode.
•The smaller the value, the more dialogue is concentrated on the center channel.
The larger the value, the more dialogue is distributed to front left and right channels,
and the more the sound image widens in the front.
Subwoofer
Turn subwoofer output on and o.
On (Default) : The subwoofer is used.
O : The subwoofer is not used.
%
•This can be set when the surround mode is “DIRECT” (vpage 43) and the
“SW Mode” (vpage59) is “LFE+Main”.
Defaults
The “Audio Adjust” settings are returned to the default settings.

Table of Contents

Other manuals for Denon AVR-X500

Related product manuals