Denon AVR-X500

70
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Checking the information
Information on the main unit’s various settings (Status) and on input signals (Audio Input Signal) is shown on the display.
STAT US
1
Press STATUS on the main unit.
The “Information” screen is displayed on the TV screen.
%
•Press INFO on the remote control unit to display current source name, volume,
surround mode name, and other information at the bottom of the screen.
Information
SOURCE:CBL/SAT
MODE
:MULTI CH STEREO
Master Volume: 0.0
NOTE
•The status display screen cannot be displayed at a computer’s resolution (e.g. VGA)
is being played.
Dialogue normalization function
This function is automatically activated when playing Dolby Digital
sources.
It automatically corrects the standard signal level for individual program
sources.
The correction value can be checked using the main unit’s STATUS.
Offset: - 4dB
The figure is the corrected value. This cannot be changed.