41
Appendix
TipsSettingsConnections
Contents
Front panel Display Rear panel IndexRemote
Playback
Radio Text
RT allows RDS stations to send text messages that appear on the display.
“Radio Text” appears on the display when radio text data is received.
1
Press TUNER to switch the input source to “TUNER”.
2
Press SEARCH to select “RT”.
3
Use o p to select “On”.
•While receiving an RDS broadcast station, the text data broadcast
from the station is displayed.
•If no text data is being broadcast, “NO TEXT DATA” is displayed.
Presetting the current broadcast station
(Preset Memory)
Your favorite broadcast stations can be preset so that you can tune them
in easily. Up to 56 stations can be preset.
1
Tune in the broadcast station you want to preset
(vpage37 “Listening to FM/AM broadcasts”).
2
Press MEMORY.
3
Press SHIFT to select the memory block (A – G) you
want to preset.
4
Use CHANNEL + or CHANNEL – to select the channel
you want to preset.
5
Press MEMORY.
The current broadcast station that is preset.
•To preset other stations, repeat steps 1 to 5.
%
•This unit can preset broadcast stations by automatically selecting them
(vpage55 “Auto Preset”).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
