Denon AVR-X500 Owner's Manual

88
TipsSettingsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Appendix
DTS-HD
This audio technology provides higher sound quality and enhanced
functionality than the conventional DTS and is adopted as an optional audio
for Blu-ray Disc. This technology supports multi-channel, high data transfer
speed, high sampling frequency, and lossless audio playback. Maximum
7.1-channels are supported in Blu-ray Disc.
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is an improved version of the conventional
DTS, DTS-ES and DTS 96/24 signals formats, compatible with sampling
frequencies of 96 or 48 kHz and up to 7.1-channels of discrete digital sound.
High data bit rate performance provides high quality sound. This format is
fully compatible with conventional products, including conventional DTS
digital surround 5.1-channel data.
DTS-HD Master Audio
DTS-HD Master Audio is a lossless audio format created by Digital
Theater System (DTS). This format provides the facility to support
up to 8 audio channels with a sampling frequency of 96 kHz/
24 bit resolution and up to 6 audio channels with a sampling frequency of
192 kHz/24 bit resolution. It is fully compatible with conventional products,
including conventional DTS digital surround 5.1-channel data.
DTS NEO:6™ Surround
DTS NEO:6™ is a matrix decoding technology for achieving 6.1-channel
surround playback with 2-channel sources. It includes “DTS NEO:6
Cinema” suited for playing movies and “DTS NEO:6 Music” suited for
playing music.
Dynamic range
The dierence between the maximum undistorted sound level and the
minimum discernible level above the noise emitted by the device.
H
HDCP
When transmitting digital signals between devices, this copyright
protection technology encrypts the signals to prevent content from being
copied without authorization.
L
LFE
This is an abbreviation of Low Frequency Eect, which is an output channel
that emphasizes low frequency eect sound. Surround audio is intensified
by outputting 20 Hz to 120 Hz deep bass to the system subwoofer(s).
M
MP3 (MPEG Audio Layer-3)
This is an internationally standardized audio data compression scheme,
using the “MPEG-1” video compression standard. It compresses the data
volume to about one eleventh its original size while maintaining sound
quality equivalent to a music CD.
MPEG (Moving Picture Experts Group), MPEG-2, MPEG-4
These are the names for digital compression format standards used for the
encoding of video and audio. Video standards include “MPEG-1 Video”,
“MPEG-2 Video”, “MPEG-4 Visual”, “MPEG-4 AVC”. Audio standards
include “MPEG-1 Audio”, “MPEG-2 Audio”, “MPEG-4 AAC”.

Denon AVR-X500 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Pre-out channels	1 SW
Speaker selector	No
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	140 W
Power output per channel (20-20KHz@8 Ohm)	75 W
HDMI in	4
Audio (L/R) in	3
Composite video in	2
Ethernet LAN (RJ-45) ports	0
Number of HDMI outputs	1
Connectivity technology	Wired
Speakers connectivity type	Clamp terminals
Multichannel pre out connectivity	RCA
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
Apple docking compatibility	Not supported
Number of products included	1 pc(s)
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	330 W
Cables included	AC

Weight and Dimensions

Depth	319 mm
Width	434 mm
Height	151 mm
Weight	7900 g