Denso BHT-8000 - 7 ] Downloading;Uploading by FTP (Available in LAN-Support BHT System Only)

Chapter 2 Getting Started the BHT and System Mode
93
[ 7 ] Downloading/Uploading by FTP
(Available in LAN-support BHT system only)
Selecting "7:FTP" on the SYSTEM MENU calls up the screen shown
at left.
[1] DOWNLOAD: Downloads a file by FTP.
[2] UPLOAD: Uploads a file(s) by FTP.
Select a desired item by using the numerical keys or F5 and F6 keys,
and then press the ENT key.
To return to the SYSTEM MENU, press the C key.
[7.1] Downloading by FTP
M1 key ⇑ ⇓ M2 key
Selecting "1:DOWNLOAD" on the FTP MENU calls up the screen
shown at left where the current settings are displayed.
Entry box for a directory and/or file name
Entry box for field information of a data file to be downloaded
Status message
IP address of an FTP server you have specified
Current directory reserved
[1] DIR/FILE: Specifies a directory and/or file name. (For details,
refer to the next page.)
[2] FIELDS: Specifies field information of a data file. (For details,
refer to the next page.)
Select a desired item by using the numerical keys or F5 and F6 keys,
and then press the ENT key. The entry box of the selected item
becomes ready to accept entry and a cursor appears.
Enter the desired value by using the numerical keys and period (.) ke
y
and then press the ENT key.
Pressing the SF key switches the entry mode between the numeric
mode (without a guidance) and alphabet mode.
In the entry mode, to delete a single character, press the BS key. To
delete the whole entry you made, press the C key.
To return to the FTP MENU, press the C key when any item is
highlighted.