Chapter 2 Getting Started the BHT and System Mode
115
2.6 Downloading System Reconfig Files and
Updating the Current Systems
2.6.1 Updating the BHT System
You may update the current BHT system in System Mode in the following two processes.
(1) Download a BHT system reconfig file to the BHT from the host PC
Download a BHT system reconfig file by using the BHT’s downloading function—the DOWNLOAD menu
or FTP MENU.
(2) Update the current BHT system
Use the BHT system updating menu (SYSTEM MODIFY) to update the BHT system.
Upon completion of updating, the BHT will automatically turn itself off. (Refer to Section 2.5.3, [13.1].)
To prevent low-battery problems during system updating operations, ensure that the BHT has
sufficient battery power or place the BHT on the CU.
During system updating, the PW key is disabled so that the BHT cannot be turned off. Wait fo
completion of updating and then press the PW key.
The latest BHT system reconfig file can be downloaded from our Web site.
http://www.denso-wave.com/
To Next Page
Loading...
