Chapter 2 Getting Started the BHT and System Mode
105
[ 11 ] Setting the Remote Wakeup
Pressing the 4 key while holding down the SF key on the SYSTEM
MENU calls up the screen shown at left.
[1] REMOTE WAKEUP: Activates or deactivates the remote
wakeup function.
[2] TRANSMIT SPEED: Sets the transmission speed for the
remote wakeup.
[3] EFFECTIVE FOR XX HOURS
Sets the timeout period of the remote
wakeup function after the BHT is turned
off. During the timeout period, the BHT is
ready to receive remote wakeup
commands. The entry range is from 1 to
24 hours.
Select a desired item by using the numerical keys or F5 and F6 keys.
Select a desired setting by using the F7 and F8 keys, and then press
the ENT key.
When setting the timeout period in [3] above, press the F7 key to
decrease it by one hour; press F8 key to increase it by one hour.
To return to the SYSTEM MENU, press the C key.
To Next Page
Loading...
