Denso BHT-8000 - 2.7 Starting Up User Programs

104
! Problem
The memory has already contained 80 files, so the BHT system
parameter file cannot be set up.
! Solution
Press the C key to return to the SYSTEM MENU, then delete
unnecessary files in the memory. (Refer to Section 2.5.3, [ 8 ].)
! Problem
Uploading has failed.
! Solution
To retry uploading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key. Check the interface
port and communications parameters in the SET SYSTEM menu o
r
perform the communications test in the TEST menu. (Refer to Section
2.5.3, [4.5] and [5.7].)
It is also necessary to check the communications parameters setup o
f
the host PC.
! Problem
The file you attempted to upload is broken.
! Solution
To upload the broken file as is, press the 1 key.