Denso BHT-8000 - 4.2 Errors in System Mode

146
4.2 Errors in System Mode
If some error occurs during operation in System Mode, one of the following error messages will appear
on the LCD.
When selecting a program file or data file
! Problem
You attempted to execute a user program in the EXECUTE
PROGRAM menu, even though no user program files had been
stored in the memories.
! Solution
Press the C key to return to the SYSTEM MENU screen, then
download user programs. (Refer to Chapter 2, Section 2.5.3,
[ 2 ].)
! Problem
In the SET SYSTEM menu, you attempted to select a user program
file as an execution program to be run when the power is applied, but
no user program files had been stored in the memories.
! Solution
Press the C key to return to the SYSTEM MENU screen, then
download user programs. (Refer to Chapter 2, Section 2.5.3,
[ 2 ].)
! Problem
You attempted to select "ONE FILE" or "ALL FILES" for uploading in
the UPLOAD menu, but no data files had been stored in the memory.
! Solution
Press the C key to return to the SYSTEM MENU screen.
! Problem
You have deleted all of the files stored in the memory in the DELETE
FILE menu.
! Solution
Press the C key to return to the SYSTEM MENU screen.