Chapter 2 Getting Started the BHT and System Mode
109
[12.2] Uploading the system message file
Selecting "2:UPLOAD" on the SYSTEM MESSAGE transfer menu
calls up the screen shown at left. With this screen displayed, the BHT
waits for the system message file to be uploaded.
⇓
While the uploading operation is in progress, the screen shown at lef
is displayed indicating the file name and the number of sent
records/the total number of records.
To abort the uploading operation, press the C key. The screen will
switch back to the SYSTEM MESSAGE transfer menu.
⇓
Upon completion of uploading, the BHT displays the screen shown at
left and beeps once.
Press the C key to return to the SYSTEM MESSAGE transfer menu.
When the BHT uploads the system message file, it creates a
temporary file named "_B80MSG.FN3" in the user area. If th
user area is insufficient for creating the temporary file, therefore,
an error will result.
The created temporary file will be automatically deleted afte
completion of uploading.
If an error occurs during uploading
If some error occurs during uploading, the BHT beeps three times and shows one of the following
screens:
To retry the uploading operation, press the 1 and ENT keys; to abort it, press the 2 and ENT keys.
Press the C key to return to the SYSTEM MESSAGE transfer menu.
! Problem
The memory is insufficient for setting up the system message file.
! Solution
Press the C key to return to the SYSTEM MENU, then delete
unnecessary files in the memory. (Refer to Section 2.5.3, [ 8 ].)
To Next Page
Loading...
