EasyManua.ls Logo

Denso BHT-8000 - Page 177

Denso BHT-8000
219 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
164
If the CU-8021 is bus-powered via the USB interface from the USB host (PC) or USB hub and the host
PC is in the suspended mode, then the CU-8021 cannot charge or discharge the battery cartridge.
If the host PC switches to the suspended mode when the CU-8021 is charging or discharging the battery
cartridge, then the CU-8021 will stop charging or discharging. When the host PC recovers from the
suspended mode, the CU-8021 will start charging or discharging again and resume counting the
charging time.
Note that if the CU-8021 is connected to such a host PC that cuts off the power to the USB line in the
suspended mode, the CU-8021 will reset the count of the charging time. When the host PC recovers
from the suspended mode, the CU-8021 will start charging and counting the charging time from zero
regardless of whether the CU-8021 was charging or discharging the battery cartridge. To prevent the
CU-8021 from getting affected from the suspended mode of the host PC, use the dedicated AC adapter.

Table of Contents

Other manuals for Denso BHT-8000

Related product manuals