EasyManua.ls Logo

DENTSPLY MULTIMAT Touch - Technical Data; Environmental Conditions

DENTSPLY MULTIMAT Touch
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
1.2 Technical data
Multimat
®
Touch
Height: closed approx. 441 mm
Open approx. 585 mm
Width: approx. 320 mm
Depth: approx. 425 mm
Voltage: approx. 220/230 V for countries with 220/230 V
approx. 100 V for countries with 100 V
approx. 110 / 115 V for countries with 110/115 V
approx. 125 V for countries with 125 V
Frequency: 50/ 60 Hz
Overvoltage category: II
Degree of contamination: 2
Protection class: I
Performance: 1350 VA without pump
Fuses: 2 x 16 A slow fuses, 6.3 x 32 mm, 250 V
Pump plug: 2.5 A
Weight: approx. 22 kg
Multimat
®
Touch&Press
Height: closed approx. 593 mm
open approx. 748 mm
Width: approx. 320 mm
Depth: approx. 425 mm
Press pressure: 2.7 bar
Voltage: approx. 220/230 V for Countries with 220/230 V
approx. 110 / 115 V for Countries with 110/115V
approx. 125 V for Countries with 125 V
Frequency: 50/ 60 Hz
Overvoltage category: II
Degree of contamination: 2
Protection class: I
Performance: 1350 VA without pump
Fuses: 2 x 15 A slow fuses, 6.3 x 32 mm, 250 V
Pump plug: 2.5 A
Weight: approx. 25 kg
1.3 Environmental conditions
Temperature: 2 °C to 40 °C
Relative air humidity: 80% at 31 °C
Height: 3500 m above sea level

Table of Contents

Related product manuals