Develop ineo+ 203 - Providing Notification of the Status of this Machine (TRAP); TCP;IP Settings

ineo+ 353/253/203 1-90
Setup items by operation
1
1.32 Providing notification of the status of this machine (TRAP)
Specify settings for notifying the administrator of the machine status using the TRAP function of SNMP.
Using this function provides notification for a specified IP address or IPX address when a warning message
occurs on this machine.
Specify the settings according to the following flowchart.
!
Detail
To use the TRAP function of SNMP, specify settings for SNMP in advance. For details, refer to
"Monitoring this machine using the SNMP manager" on page 1-84.
1.32.1 TCP/IP Settings
Specify settings to use this machine in a TCP/IP network environment.
For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2.
➀ Provide notification for an IP
address
➁ Provide notification for an IPX
address
➀ ➁
TCP/IP Settings NetWare Setting
TRAP Setting
Status Notification Setting
Finish