ineo+ 353/253/203 1-28
Setup items by operation
1
E-mail RX (POP)
In Administrator mode of Web Connection, select the Network tab - "E-mail Setting" - "E-mail RX (POP)".
Specify the following settings.
Item Definition Prior confirmation
E-mail RX Setting To perform POP before SMTP, select "ON".
POP Server Address Specify the POP server address. (Format: "***.***.***.***",
Range for ***: 0 to 255)
If the DNS server is specified, the address can be specified
using the host name.
This item can also be specified with IPv6.
Address of the server
Login Name Enter the login name for the POP server (up to 63 charac-
ters).
Password Specify the password for logging in to the POP server (up to
15 characters).
Connection Timeout Specify the time period before the server connection times
out.
Port Number Default setting: 110
Specify the port number.
Port number for the serv-
er
To Next Page
Loading...
