ineo+ 353/253/203 1-50
Setup items by operation
1
1.15.5 E-mail TX (SMTP)
Specify settings for sending messages.
For details, refer to "E-mail TX (SMTP)" on page 1-24.
1.15.6 I-Fax Advanced Setting
In Administrator mode of Web Connection, select the Network tab - "E-mail Setting" - "I-FAX Advanced
Setting".
Specify the following settings.
!
Detail
If the Internet fax function is disabled, this menu item is not displayed.
1.15.7 SMTP over SSL/Start TLS
Specify the settings for SMTP over SSL/Start TLS.
For details, refer to "SMTP over SSL/Start TLS" on page 1-26.
Item Definition Prior confirmation
MDN Request Select "ON".
If the fax is printed at the receiving side, MDN response can
be received.
DSN Request Select "ON".
If the fax reaches the mail server at the receiving side, DSN
response can be received.
If MDN is specified to "ON", DSN is not required.
MDN/DSN Response
Observation Time
Specify the waiting time for MDN or DSN response.
MDN or DSN response of which set waiting time was up is
ignored.
Maximum Resolution Specify the maximum resolution.
To Next Page
Loading...
