Develop ineo+ 203 - IKE Setting; SA Setting

ineo+ 353/253/203 1-123
Setup items by operation
1
1.41.3 IKE Setting
In Administrator mode of Web Connection, select the Network tab - "TCP/IP Setting" - "IPsec" - "IKE" - [Edit].
Specify the following settings. (Up to four groups can be registered in "IKE".)
1.41.4 SA Setting
In Administrator mode of Web Connection, select the Network tab - "TCP/IP Setting" - "IPsec" - "SA" - [Edit].
Specify the following settings. (Up to eight groups can be registered in "SA".)
Item Definition Prior confirmation
Key Validity Period Specify the validity period of a key generated when creating
a control tunnel.
Diffie-Hellman Group Select "Diffie-Hellman Group".
Encryption Algorithm Select the encryption algorithm to be used when creating a
control tunnel.
Authentication Algorithm Select the authentication algorithm to be used when creating
a control tunnel.
Item Definition Prior confirmation
Lifetime After Establish-
ing SA
Specify the validity period of a key generated when creating
a communication tunnel.
Security Protocol Select the security protocol.
ESP Encryption Algo-
rithm
When "ESP" is selected for "Security Protocol", specify the
ESP encryption algorithm.
ESP Authentication Al-
gorithm
When "ESP" is selected for "Security Protocol", specify the
ESP authentication algorithm.
AH Authentication Algo-
rithm
When "AH" is selected for "Security Protocol", specify the
AH authentication algorithm.