Dickey-John Control Point - Time;Date Setup; System Units

OPERATOR’S MANUAL
Control Point ®
11001-1489-201702 Rev B
30 / KEYBOARD PROGRAMMING
Figure 19
Verifying Blast Setup Menu Adjustments
TIME/DATE SETUP
3. Press F12 function key to return to the Misc Menu and select Time/
Date (2), refer to Figure 20.
Verify or correct the following settings:
– 24 HOUR – Press (Y) YES for 24 hour time; (N) NO for standard 12
hour time.
– HOUR – Enter the correct hour.
– MINUTES – Enter the correct minutes.
– AM/PM – Enter A for AM or P for PM (This selection does not
appear for 24 hour time).
– MONTH –Enter the correct numerical month.
– DAY – Enter the correct day of the month.
– YEAR – Enter the last two digits of the year.
Figure 20
Setting Time and Date
SYSTEM UNITS
4. Select F12 to return to the Misc Menu and select System Units (3)
(refer to Figure 21).The System Units screen allows either English or
BLAST SETUP
BLAST TIMER 10 SECONDS
BLAST SPEED 5.0 MPH
Select Item 1
from F12 Function Screen
(MISC Screen)
PROGRAM TIME / DATE
24 HOUR NO
HOUR 6
MINUTES 39
AM / PM P
MONTH 8
DAY 26
YEAR 6
Select Item 2
from F12 Function Screen
(MISC Screen)
.