Dickey-John Control Point - System Calibration; Recording Calibration Data; Repeating Calibration Runs; Maintaining Calibration Accuracy

OPERATOR’S MANUAL
Control Point ®
11001-1489-201702 Rev B
68 / KEYBOARD PROGRAMMING
Figure 44
Access and Reset Accumulators
ACCUMULATORS
SELECT A MENU ITEM
1 GRANULAR
2 LIQUID
3 PAUSE
4 ENABLE CLR FROM CURRENT
TOTALS SCREEN
ENABLE / DISABLE CLEAR
Y - YES N - NO
ENABLE CLEAR FROM
CURRENT TOTALS SCREEN?
Press Function Key F9
(ACCUM Menu)
PAUSE TOTALS
CURRENT (C - CLR CURRENT)
PAUSE MILE 0.0
PAUSE HOURS 0.0
SEASON (S - CLR BOTH)
PAUSE MILE 0.0
PAUSE HOURS 0.0
ACCUMULATORS
SELECT A MENU ITEM
1 LIQUID 1 DISABLED
2 LIQUID 2 DISABLED
3 LIQUID 3 DISABLED
4 LIQUID 4 DISABLED
ACCUMULATORS
SELECT A MENU ITEM
1 SALT ENABLED
2 SAND DISABLED
3 MIX A DISABLED
4 MIX B DISABLED
SAND TOTALS
CURRENT (C – CLR CURRENT)
TONS AUTO 4.5
MILES AUTO 2.8
HOUR AUTO 3.97
TONS BLAST 4.3
MILES BLAST 3.2
HOUR BLAST 0.25
SEASON (S – CLR BOTH)
TONS AUTO 435.5
MILES AUTO 1536.7
HOUR AUTO 39.3
TONS BLAST 14.3
MILES BLAST 13.2
HOUR BLAST 1.25