Digi IX10 User Manual

Virtual Private Networks (VPN) Generic Routing Encapsulation (GRE)
IX10 User Guide
427
3. Click VPN > IPsec > Tunnels.
4. For Add IPsec Tunnel, type ipsec_gre1 and click .
5. Click to expand Authentication.
6. For Pre-shared key, type testkey.
7. Click to expand Remote endpoint.
8. For Hostname, type public IP address of the IX10-2 device.
9. Click to expand Policies.
10. For Add Policy, click  to add a new policy.
11. Click to expand Local network.
12. For Type, select Custom network.
13. For Address, type the IP address and subnet of the local GRE tunnel, 172.30.0.1/32.
14. For Remote network, type the IP address and subnet of the remote GRE tunnel,
172.30.0.2/32.

Digi IX10 Specifications

General

Brand	Digi
Model	IX10
Category	Network Router
Language	English