Virtual Private Networks (VPN) Dynamic Multipoint VPN (DMVPN)
IX10 User Guide
443
/32.
5. Configure NHRP:
a. Click Network > Routing Services.
b. Enable routing services.
c. Click to expand NHRP.
d. Enable NHRP.
e. Click to expand Network.
f. Click to add a network.
g. For Interface, select the interface created above.
h. For Tunnel, select the IP tunnel created above.
i. Click to expand Next hop servers.
j. Click to add a server.
k. For NBMA address, type the hostname or IP address of the node that will be the next hop
To Next Page
Loading...
Need help?
General
