Digi IX10 User Manual

Services Use the MQTTbroker service
IX10 User Guide
589
n
If PSK is selected:
a. Click to enable Use PSK identity as username to use the PSK identity sent by the
client as its username.
b. (Optional) For Identifier, type a string that identifies the listener and is sent to the
clients.
c. Click to expand Pre-shared keys.
d. Click  to add a pre-shared key.
e. For Identity, type the identity sent to the client.
f. For Key, type or paste the pre-shared key in hexadecimal format that is associated
with the client identity.
g. Click  again to add additional pre-shared keys.
14. Click to expand Topic access control list.
The topic access control lists controls what topics clients can access. If no topics are included,
then clients have access to all topics. If any topics are listed, access is restricted to only the
listed topics.
n
To restrict access for anonymous clients to particular topics:
a. Click to expand Anonymous.
b. Click  to add a topic.
c. For Topic, type the topic. The signal level wildcard, +, and multi-level wildcard, #,
are supported.
d. For Access, select the level of access that the client will have:
l
Read
l
Write
l
Read/write
l
Deny
e. Click  again to add additional topics.
n
To restrict access to topics based on pattern substitution:
a. Click to expand Pattern.
b. Click  to add a topic.
c. For Topic, type the topic. The variables %c and %u can be used as substitutes for
the client IDor username. If a variable is used, it can be the only text for that level
of the hierarchy..
d. For Access, select the level of access that the client will have:
l
Read
l
Write
l
Read/write
l
Deny
e. Click  again to add additional topics.
15. Click Apply to save the configuration and apply the change.
Command line

Digi IX10 Specifications

General

Brand	Digi
Model	IX10
Category	Network Router
Language	English