Revision Date Description
n
Added a AT&T LWM2M support setting to enable or
disable AT&T lightweight M2M on cellular modems.
n
VPN:
l
DMVPN phase 1 spoke support with NHRP or mGRE,
including compatibility with Cisco DMVPN hubs.
l
Added support for SHA2 ciphers for IKEv2 IPsec
tunnels.
n
Disabled mDNS by default for improved cellular
performance.
n
If the device has a configured System > Name, it is now
displayed on the Dashboard.
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States
and other countries worldwide. All other trademarks mentioned in this document are the property of
their respective owners.
© 2023 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document “as is,” without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
Customer support
Gather support information: Before contacting Digi technical support for help, gather the following
information:
Product name and model
Product serial number (s)
Firmware version
Operating system/browser (if applicable)
Logs (from time of reported issue)
Trace (if possible)
Description of issue
Steps to reproduce
IX10 User Guide
6
To Next Page
Loading...
Need help?
General
