Revision Date Description
l
Multiple MQTT clients with unique topics and
authentication credentials.
l
Pre-shared key encryption with multiple
configurable keys.
l
Pattern filtering for topic access control.
n
Added support for Next-hop routing protocol (NHRP).
n
Added support for mGREtunnels.
n
Added support for ICMP redirect messages.
n
Added a polling interval to control how often the
cellular modem is polled for signal strength and other
status.
n
New commands: tail and grep.
n
Add Timeout option to modem Carrier Scan window in
the Web UI.
n
Added advanced watchdog to:
l
Monitor critical services and reboot the device if
those services fail.
l
Monitor memory usage and log errors or reboot the
device based on current memory usage.
n
Added the ability to have serial port data written to the
system log.
l
Removed options in the local web UI and Admin CLI
for manually starting, stopping, and clearing serial
logs. These actions are now controlled under the
data logging configuration settings.
L May 2023
Release of Digi IX10 firmware version 23.3:
n
Surelink:
l
Redesigned Surelink configuration settings.
l
Added show surelink state Admin CLI command to
display the overall pass/fail status of enabled
Surelink tests.
n
New configuration settings for LXC containers:
l
Start on boot to configure the container to start
when the system boots.
l
Restart timeout to configure the container to
restart if it stops.
l
Optional parameters to include optional
parameters for the container.
l
Mounted directories to setup shared directories
between the host filesystem and the container.
IX10 User Guide
5
To Next Page
Loading...
Need help?
General
