System administration Configure a power profile
IX10 User Guide
830
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click System > Power to display the power settings.
4. The Profile setting displays the active power profile and allows you to change it. The available
options are:
n
Performance: The CPU clock frequency is scaled up to work in the highest available
frequency and provide a better system performance.
n
Auto: The CPU clock frequency is dynamically scaled up and down to provide better
performance during high demanding conditions and also to save power during
To Next Page
Loading...
Need help?
General
