Digi IX10 User Manual

Interfaces Wireless Wide Area Networks (WWANs)
IX10 User Guide
85
(config network interface my_wwan surelink actions 0)> max_
attempts int
(config network interface my_wwan surelink actions 0)>
The default is 3.
l
Set the time to wait before the next test is run. If set to the default value of 0s,
the test interval is used.
(config network interface my_wwan surelink actions 0)>
override_interval int
(config network interface my_wwan surelink actions 0)>
n
reboot_device.
If reboot_device is selected, complete the following:
l
Set the number of attempts for this recovery action to perform, before moving
to the next recovery action:
(config network interface my_wwan surelink actions 0)> max_
attempts int
(config network interface my_wwan surelink actions 0)>
The default is 3.
l
Set the time to wait before the next test is run. If set to the default value of 0s,
the test interval is used.
(config network interface my_wwan surelink actions 0)>
override_interval int
(config network interface my_wwan surelink actions 0)>
n
custom_action: Execute custom recovery commands.
If custom_action is selected, complete the following:
l
Set the number of attempts for this recovery action to perform, before moving
to the next recovery action:
(config network interface my_wwan surelink actions 0)> max_
attempts int
(config network interface my_wwan surelink actions 0)>
The default is 3.
l
Set the commands to run to attempt to recovery connectivity.
(config network interface my_wwan surelink actions 0)>
custom_action_commands_modem "string"
(config network interface my_wwan surelink actions 0)>
l
Set the time to wait before the next test is run. If set to the default value of 0s,
the test interval is used.

Digi IX10 Specifications

General

Brand	Digi
Model	IX10
Category	Network Router
Language	English