Digi PortServer II

Page 178 Configuring RADIUS 90030500B
Configuring RADIUS on a Server
To use RADIUS with PortServer II, you must have at least one RADIUS server on
your network. You can download the RADIUS server binary code from Digi Interna-
tional’s FTP server, if you do not already have it installed.
Note:
The Digi International FTP server includes the following RADIUS server
binaries: Linux, SCO Unix, Solaris, Unixware SVR4, Windows NT, BSD,
and Free BSD.
To download the FTP server binary:
1. Connect to the Digi International FTP server
ftp.dgii.com
.
2. Change directory to
drivers/portserv/radius
.
3. Identify the
/bin
directory containing the binary for your server (for example,
/bin/sco
contains the binary for SCO Unix server) and download the file.
4. Install the binary following the instructions contained in the associated README
file.